Emc Ferrite Tile For Anechoic Chamber Test High Quality Competitive
Price
With specialized technologies for developing various ferrite items
to meet customer’s demands, Samwha has been manufacturing excellent
ferrite absorbers (Flat and grid types).
Samwha ferrite absorbers show excellent absorbing performance,
customer_faqally resistant qualities, high strength and good heat
resistance. So they can be widely used as anechoic chamber for
electro-magnetic compatibility(EMC) testing or block against
electromagnetic interference(EMI).
Ferrite Tile Size
· Base size: 100*100mm
· Standard height: 5.2mm, 6.7mm
· Diameter of bore: 10mm
| Initial permeability | 5500 |
| Relative loss factor | 15@0.1MHz |
| Saturation flux density | 280(1194A/m) |
| Remanence | 180 |
| coercivity | 3 |
| Relative temp.factor | 3 |
| Curie temp. | 90 |
| Density | 4.85*1000 |
| Resistivity | 100 |
| 30MHz | -25.5dB |
| 100MHz | -38dB |
| 300MHz | -19.5dB |
| 500MHz | -16dB |
| 700MHz | -12dB |
| 1000MHz | -10dB |
Ferrite Tile Application
· Used for EMC chamber
Based on the principle of having complex magnetic permeability
equal (or nearly equal) to complex dielectric constant. Materials
with this property exhibit an impedance equal to that of "free
space" and therefore do not reflect radiated energy at normal
incidence. Ferrite Tile can provide 10dB - 25dB of absorption
between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches),
but can be heavy (roughly 10 lbs per square foot).
Size for EMC chamber ferrite tile
· Base size: 100*100mm
· Standard height: 5.5mm, 6.7mm
· Diameter of bore: 10mm
Application for EMC chamber ferrite tile Used for EMC chamber
About US
- Our technical team has more than 10 years’ experience in designing
EMI filter. We know UL VDE CSA CE CQC etc safety standard very
well.
- Our technical service team learn many kinds of test standard such
as industrial application (IEC61800-3 for frequency inverter drive
EN12015 for elevator EN55011 for ISM device etc) and military
application (GJB151A GJB152A etc).We can solve EMI problem quickly
effectively and low-costly.
- Our test equipment: LCR digital bridge/voltage proof
tester/insulation resistance tester/spectrum analyzer/inductor
tester/standard signal source/shield room/interference intensity
tester etc
- Our product: EMI filter for general purpose/EMI filter for
frequency inverter/EMI filter for shielding facility/EMI filter for
military application
- Our advantage: high quality/high cost-effective/short lead time
- Our service: all products have two years guarantee
- Our main customers: frequency inverter drive and servo drive
system/MRI shielding system/solar inverter system/rail transit
system etc
